192.168.1.250 Default Router IP Login

It's default login IP that is reserved for modems or wireless routers. By typing 192.168.1.250 in the address bar of your browser you will get access to the admin interface of your router. 192.168.1.250 is mostly used by brands like Linksys, Netgear or SparkLAN . It's not the only standard IP for routers. There are dozens of different IPs like 192.168.1.1, 192.168.0.1 or 192.168.2.1 that were used to access your Wireless Range Extender, Wireless Access Point or access point control panel. Such a standard IP is also called Default Gateway IP.

Not many people know their router IP because in most cases there is only one situation you need the IP 192.168.1.250. That is while the setup proccess executed by a technician. So you never get in contact with 192.168.1.250. But sometimes you want to change the SSID (WiFi network name), the WiFi-Password or the parental controls. Then you need the IP 192.168.1.250. After logging into your router you'll see the navigation panel where you are able to manage the data traffic, see statistics and configure the router settings.

Where is the login page for 192.168.1.250 ?

192.168.1.250 You simply need to input http://192.168.1.250 in your browser and you will be directed to the login page for your admin panel.

192.168.1.250 login page

If you are not sure of your password or you encounter a wrong match on your password, you can just reset the modem to factory settings.

192.168.1.250 default username password

Resetting the password for 192.168.1.250 ?

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your modem. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings.

192.168.1.250 router reset

What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. If you have not enough information, we recommended that you should get help from someone who has that kind of knowledge.

Default username & password combinations for devices that use 192.168.1.250 as their default IP address

This list will show you the most used default usernames and passwords for the device IP 192.168.1.250.

# Username Password
1adminadmin
2adminpassword
3(blank)admin
4(blank)public
5n/an/a
6n/aadmin
72000CTL

Router models that use 192.168.1.250 as their default IP

Netgear WN2500RPv1
repeater
Default username: admin
Default password: password
Netgear EX7300
Wireless Range Extender
Default username: admin
Default password: password
Netgear EX6400
Wireless Range Extender
Default username: admin
Default password: password
Netgear EX6200
Wireless Range Extender
Default username: admin
Default password: password
Airlink101 AP431W
access point
Default username: admin
Default password: admin
Linksys WGA600N
Wireless Bridge
Default username: admin
Default password: admin
Netgear WN1000RP
Wireless Range Extender
Default username: admin
Default password: password
Netgear WN3000RPv1
repeater
Default username: admin
Default password: password
TRENDnet TEW-410APB
access point
Default username: admin
Default password: admin
Netgear WN3500RP
Wireless Range Extender
Default username: admin
Default password: password